Description
Dry helmet quickly and make your helmet comfortable and sanitary the next time your wear it
Dryer for comfortable helmet installation
A helmet that plays a role in protecting lives in motor sports, bikehelmet and carhelmet travel, etc. is one of the indispensable items. I want to keep the internal buffer clean at all times, but if I leave sweat soaked in the inside of the helmet worn in the hot summer season as it is, it will create an environment where various bacteria can propagate. When bacteria propagate, of course not only unsanitary but also offensive odor, it becomes unbearable to wear an important helmet. In order to prevent such a condition, always dry the helmet before sweat gets wet, and always clean the helmet used every day to a variety of people such as a four-wheeled driver, a hobby, or a daily commuting means such as motorcycle. It is “Dr. Dry (doctor dry) ”that was born to keep in.
Care tools dedicated to helmets.A new design that can be fixed stably and an easy-to-check digital display.
Multi vent that helmet fits perfectly
Air vent Sterilize the inside of the helmet with ultraviolet light emitted from purple LEDs placed on the left and right of the air vent.
We can set up to 10 minutes unit up to 90 minutes
We can change air blow and warm air.Hot air of 50 ¡ î is efficiently sent inside from the air vent that fits inside the helmet, and it dries quickly.
Arai BELL, STILO, SHOEI Other helmets compatible
Product specifications/standards
Name: helmet dryer Dr. Dry
Model number: DR2Y-19
Constant voltage: AC100-250V
Constant frequency: 50/60Hz
Rated power consumption: 100 W (at the time of warm air) / 6 W (at the time of air blowing)
Timer: 30 minutes ¡ ¦ From 10 minutes up to 90 minutes
Safety device: Limiter 75 ¡ î
Thermal fuse: 113 ¡ î Hot air temperature: approx. 60 ¡ î (blowing part)
Wind speed: about 4km/h
Sterilizing UV lamp: 4 wavelength: 365nm
Main material: Body: ABS resin
Cord length: about 1.2m
Dimensions: W: about 284 mm ¡ ß H: about 84 mm ¡ ß D: about 130 mm
Weight: about 0.6 kg (including power cord)
ONLY Japanese manual included
---------------
Dryer for comfortable helmet wearing
Helmets that play a role in saving lives in two-wheeled and four-wheeled driving, including motor sports, are one of the indispensable items.You want to keep the cushioning material inside clean at all times, but if you leave the sweat that has soaked inside the helmet worn during the hot summer season as it is, it will create an environment where germs can grow.Propagation of bacteria not only makes them unsanitary, but also gives off a strange odor, making it unbearable to wear an important helmet.To prevent such a situation, by drying quickly before sweat soaks in, the helmet used for one day is always clean for various people such as 2-wheel drivers and those who have a hobby or daily commuting means of 4 wheels. It was born to keep inDr.Dry(Doctor Dry) ”.
●Dr.Dry HELMET DRYER
■ Care tool for helmets.New design that can be fixed stably and digital display that is easy to check.
■ Multi-vent vent that fits the helmet perfectly
■ Air vent The inside of the helmet is sterilized by the ultraviolet rays emitted from the purple LEDs placed on the left and right.
■ Can be set in 10-minute units up to 90 minutes
■ You can switch between blowing and warm air.Warm air of 50 ° C is efficiently sent to the inside from the air vent that fits inside the helmet, and it dries quickly.
■ Compatible with Arai, BELL, STILO, SHOEI and other helmets
● Product specifications / standards
・ Product name: Helmet Dryer Dr.Dry
・ Model number: DR2Y-19
・ Rated voltage: AC100-250V
・ Rated frequency: 50 / 60Hz
・ Rated power consumption: 100W (when warm air) / 6W (when blowing air)
・ Timer: 30 minutes ・ After that, up to 10 minutes in 90-minute units
・ Safety device: Limiter 75 ℃
・ Temperature fuse: 113 ℃
・ Warm air temperature: Approximately 60 ℃ (blowing part)
・ Wind speed: Approximately 4km / h
・ Sterilized UV lamp: 4 Wavelength: 365nm
・ Main material: Body: ABS resin
・ Cord length: Approximately 1.2m
・ External dimensions: W: Approx. 284 mm x H: Approx. 84 mm x D: Approx. 130 mm
・ Weight: Approximately 0.6 kg (including power cord)
・ Accessories: Instruction manual
Delivery time: Ordered product Delivery time: 3 days to 1 week. In the case of missing goods manufacturers, it may take some time for delivery.
DRY HELMET DRYER Helmet Dryer Dryer Sterilization Antibacterial Two-wheeled helmet AUTO HELEMRT MOTORSPORT Motorsport RACINGKART Racing cart Auto race bike Circuit running Arai Bell Steiro HELMET
● Note:
* The helmet in the photo is not included as an image.
* This dryer is for helmets only.
* Cannot be used for bags, suits, shoes, and gloves.
