Use a racing car, etc. to make the seat according to your body type and make it with urethane foam. The bucket material wrapped around the foam material is often made of non-fireproof fabric, but there is a possibility that fireproofness will be required by FIA regulations in the future. For safety reasons, we recommend using fireproof fabrics even if it is not an official competition.
ISO 3795: 1989 (E)
FIA 8862 official recognition
The material of the 3D bucket fabric is flame retardant and approved by the FIA for competition seats. Developed specifically for upholstering buckets, this fabric is manufactured with a reticulated grid construction that provides a high level of grip while at the same time facilitating transpiration.
With a thickness of 3mm, it provides a soft effect touch for added comfort to the driver. Moreover, its perforated pattern makes it a very light fabric with a total weight of only 0.23 g / ㎠.
Composition100% PES
Thickness 3 mm
Weight230g / m2 ± 5%
Usable width 160 cm
For racing seat
PIVOT Pivot 3DRIVE α (Alpha) Throttle controller & cruise controller [Main unit] + [Nissan (for AT / CVT vehicles) Dedicated Har ..
![PIVOT Pivot 3DRIVE α (Alpha) Throttle controller & cruise controller [Main unit] + [Nissan (for AT / CVT vehicles) Dedicated Har ..](https://thumbnail.image.rakuten.co.jp/@0_mall/mono/cabinet/02143764/imgrc0075268056.jpg?_ex=128x128)
32,780 yen (tax included)
PIVOT 3-DRIVE ・ α [THROTTLE CONTROLLER & AUTO CRUISE SPORTS & ECO] [Nissan car (AT / CVT car) dedicated harness] [Brake harness] is included in the set!Please be sure to check the harness type in the compatibility table for compatible vehicles (for AT / CVT vehicles). When ordering, be sure to enter the model and year displacement model in the comment list.
PIVOT Pivot 3DRIVE α (Alpha) Throttle controller & cruise controller [Main unit] + [Toyota (for AT / CVT vehicles) Dedicated Hane ..
32,780 yen (tax included)
Rating 5PIVOT 3-DRIVE ・ α [THROTTLE CONTROLLER & AUTO CRUISE SPORTS & ECO] [Main unit and Toyota car (AT / CVT car) dedicated harness] [Brake harness] is included in the set!Please be sure to check the harness type in the compatibility table for compatible vehicles (for AT / CVT vehicles). When ordering, be sure to check the comment list for the model and year displacement model ..
FET Driving Gloves 3D Lightweight Gloves Red x Black Made in Japan for Racing Carts and Driving Events MADE IN JAPAN (FT3DLW)
7,150 yen (tax included)
FET 3D LIGHT WEIGHT GLOVES MADE IN JAPAN In addition to the fit provided by the three-dimensional cutting, the fabric and design enhance the direct feel and flexibility of the wrist, so even beginners who are wearing gloves for the first time can use them without discomfort.In addition, in order to reduce the discomfort caused by the seams, the finger part has a rubber band.
FET Racing Gloves 3D RACING Black x Black Made in Japan for racing karts and driving events MADE IN JAPAN
8,250 yen (tax included)
FET 3D RACING GLOVES MADE IN JAPAN As a top brand of driving gloves, FET SPORTS racing gloves are highly rated for meeting a wide range of performance requirements.3D new sensation by draping.Picket stitching is used on the fingers to reduce the discomfort caused by the seams and to achieve a good design.intense..
FET Racing Gloves 3D RACING Yellow x Black Made in Japan for racing karts and driving events MADE IN JAPAN
8,250 yen (tax included)
FET 3D RACING GLOVES MADE IN JAPAN As a top brand of driving gloves, FET SPORTS racing gloves are highly rated for meeting a wide range of performance requirements.3D new sensation by draping.Picket stitching is used on the fingers to reduce the discomfort caused by the seams and to achieve a good design.intense..
PIVOT Pivot 3DRIVE α (Alpha) Throttle controller & cruise controller [Main unit] + [Mazda (for AT / CVT vehicles) Dedicated Hane ..
32,780 yen (tax included)
PIVOT 3-DRIVE ・ α [THROTTLE CONTROLLER & AUTO CRUISE SPORTS & ECO] [MAZDA car (AT / CVT car) exclusive harness] [Brake harness] is included in the set!Please be sure to check the harness type in the compatibility table for compatible vehicles (for AT / CVT vehicles). When ordering, be sure to enter the model and year displacement model in the comment list.
FET Racing Gloves 3D RACING Red x Black Made in Japan for racing karts and driving events MADE IN JAPAN
8,250 yen (tax included)
FET 3D RACING GLOVES MADE IN JAPAN As a top brand of driving gloves, FET SPORTS racing gloves are highly rated for meeting a wide range of performance requirements.3D new sensation by draping.Picket stitching is used on the fingers to reduce the discomfort caused by the seams and to achieve a good design.intense..
FET Racing Gloves 3D RACING Red x White Made in Japan for racing karts and driving events MADE IN JAPAN
8,250 yen (tax included)
FET 3D RACING GLOVES MADE IN JAPAN As a top brand of driving gloves, FET SPORTS racing gloves are highly rated for meeting a wide range of performance requirements.3D new sensation by draping.Picket stitching is used on the fingers to reduce the discomfort caused by the seams and to achieve a good design.intense..
-273 Racing Gloves DRIP Cyan x Black Racing Kart Gloves MY2022
10,980 yen (tax included)
Rating 2Minus273 KARTING GLOVE DRIP Many champions of the All Japan Kart Championship A reliable grip from rental carts to world championships! -273 is a motor sports athlete apparel brand that originated in the United States for the first time in Japan. Since 2008 Kimi Raikkonen, Ben Hanley, Bruce Jouanny, Scott Speed and others ..
FET Driving Gloves 3D Lightweight Gloves Blue x White For Racing Carts and Driving Events Made in Japan (FT3DLW)
7,150 yen (tax included)
FET 3D LIGHT WEIGHT GLOVES MADE IN JAPAN In addition to the fit provided by the three-dimensional cutting, the fabric and design enhance the direct feel and flexibility of the wrist, so even beginners who are wearing gloves for the first time can use them without discomfort.In addition, in order to reduce the discomfort caused by the seams, the finger part has a rubber band.
